The Jack Tar PDF£7.50
This copious bucket bag has space for an almost infinite amount of stuff. Make it in traditional British oilskin, sturdy canvas, cotton drill or denim. Fully lined with 3 divided internal pockets. The most useful of bags.
Skill level; Beginner
This is a PDF pattern. All seam allowances are 1.5cm unless stated otherwise and are included in the pattern.
This PDF gives you the A4 and A0(copy shop) versions.
The sample in the picture is made from Yellow Dry Oilskin, which can be found in our cloth/utility section. The off white bag is made from Bull Denim with a natural leather handle. Please note we have put the lining pocket on the front of the bag for this sample.
The blue bag is made from Expedition Oilskin in navy.
All hardware for this pattern can be found in our hardware section. Please look in suitable fabrics for our suggestions, for the lining we suggest something like a simple cotton or Duck Canvas.
When inserting the rivets we recommend using a very solid surface like a cement floor so there is no movement.
Finished measurements length 43cm, width 47cm.FABRIC REQUIREMENTS AND HARDWARE - JACK TAR BAG
|Jack Tar Bag||Amount Needed|
|Self 80cm wide without nap||1.15M|
|Self 115 - 120cm wide without nap||0.90M|
|Self 140 - 150cm wide without nap||0.75M|
|Lining 80cm wide without nap||1.10M|
|Lining 102 - 120cm wide without nap||0.75M|
|Lining 136 - 150cm wide without nap||0.55M|
|Leather Strap 2.5cm (1")||0.70M|
|Rivets approx 9mm||4|
|D Rings 2.5cm (1")||2|
|Webbing for Handle (optional)||1.00M|