The Braemar PDF

In stock

$9.75

Fabric Requirements / Size Chart

product:

Addition:

Qty:

Details Suggested fabrics Notions Resources Made by you

Description:

A chunky pair of paw-like mittens for frosty days when it's too cold to use your fingers anyway.

Select to add on a 45cm x 70cm piece of Natural Wool Sherpa, just the right amount you need to make the Braemar.

Seam allowance is 1cm, unless stated otherwise.

Skill level - intermediate.

This pdf pattern is a tiled version made up of 1 A1 page and 13 A4 pages.

Fabric suggestions - oilskin, dry oilskin, mid weight cotton canvas or drill, corduroy, mid weight denim (8-14oz) & wool coating.

Lining suggestions - wool sherpa, mid weight wool, 3-6oz cotton.

Paper vs PDF

If you order a paper copy you will be sent a printed version of our pattern. If you select PDF, you are purchasing a digital file which will be stored on your account to be downloaded at any time. PDF's will include a tiled, an A1 copy shop file and your instructions. The tiled file can be used on any home printer and stuck together and is compatible with both A4 and US letter paper. Alternatively, you can send off the copy shop file to be printed full size; we can usually recommend someone in your area. If you are in the UK, we would recommend The Fold Line. The instructions can either be printed at home or simply follow along on your computer or phone.

Fabric requirements / size chart

Click here.

You will need

Matching thread.

0.3M /1/2YD self (outer layer).

0.3M/1/2YD lining.

1 x strip of Merchant & Mills pre made rib or 0.2M/1/4YD ribbing*.

Rib stretch:

The ribs we have used for this pattern stretch by half again. If using an alternative, always check rib stretch on a 10cm measurement. If it stretches to less than 15cm, cut with generous seam allowance (5cm) then pin, tack and try on.