The Hot Water Bottle Cover PDF

In stock

Free

product:

Qty:

Details Suggested fabrics Notions Resources Made by you

Description:

A classic hot water bottle cover. Make it lined or unlined, bagged out or bound.

All seam allowances are 1cm unless otherwise stated.

Skill level - intermediate.

This PDF pattern is made up of 15 A4 pages.

You can download the pattern here.

Fabric Suggestions - linen, 7-12oz denim, wool, corduroy, quilted jacquard and quilted cotton. For linings - cotton voile, light-weight linen, cotton poplin, lightweight wool and slip linings.

PDF

You are purchasing a digital file which will be stored on your account to be downloaded at any time. PDF's will include a tiled and your instructions. The tiled file can be used on any home printer and stuck together and is compatible with both A4 and US letter paper.

Finished Measurements

Length - 36CM/14 1/4"

Width - 24CM/9 1/2"

You will need

Matching thread.

0.4M/1/2YD self

0.4M/1/2 YD Lining (optional)

Contrast fabric for ties (optional):

13CM/5 1/4" x 24CM/9 1/2"

Bias binding (optional) 3.5CM/1 1/2" x 1.7M/2YD

Fabrics pictured: (from left to right)

We have used Shadow Jacquard Cotton and our Wool Sherpa (calico for the ties).

Pattern updates and errata’s

22/11/23 Updated instructions - step 26 corrected to say 'Right sides together'.

Suggested Fabrics

Rushes
Quilted Jacquard Cotton

Dauphine
Quilted Jacquard Cotton *discounted

Shadow
Quilted Jacquard Cotton

Makers
Quilted Jacquard Cotton

Soft Stitch Navy
Quilted Jacquard Cotton

Lunar Black Square
Quilted Jacquard Cotton

Pollen
Quilted Jacquard Cotton

Soft Stitch Ecru
Quilted Jacquard Cotton

Ahoy
Quilted Jacquard Cotton

Show all suitable

Notions

Bias Binding Teddy Bear's Picnic

Bias Binding Crabapple

Bias Binding Redwood Check

Bias Binding Canti

Bias Binding Portland

Bias Binding Bumble

Bias Binding Jardin Azure

Bias Binding Tuba Stripe

Bias Binding Indigo Snow

Show all other notions

Resources

How To Use Bias Binding

Learn how to use our new 2cm wide bias binding to finish the edges of your necklines, seams and hems creating a beautiful finish. Our Bias Binding is made from some of our best-selling Indian cottons, as the name suggests, it's cut on the diagonal of the cloth making it stretchy and able to fit neatly around curves. You can experiment with Hong Kong seams or turn a length of our Quilted & Cotton Jacquard into a beautiful throw instantly by binding the edges. Play with complimenting or contrasting binding as each tape corresponds to a best-selling cotton in our current collection.

In the below tutorials, Hannah demonstrates how to use our new bias binding to create tidy little ties, finished edges and a bound neckline. Our free hot water bottle cover pattern makes the perfect pattern for practicing! We've chosen to use our Indigo Snow Bias binding and our Indigo Enoki Indian block print cotton.

Read the steps below or watch the video tutorials on Instagram.

INSTAGRAM TUTORIAL - HOW TO USE BIAS BINDING: HOW TO BIND A NECKLINE

INSTAGRAM TUTORIAL - HOW TO USE BIAS BINDING: HOW TO SEW NEATLY BOUND EDGES & TIDY TIES

HOW TO USE BIAS BINDING

How to make neat ties using your bias binding:

Cut your strips to the desired length or the length specified by your sewing pattern.
Unfold the left side of your bias binding and fold down the top 1cm. Press.
Fold the the bias tape in half down the centre of the binding.
Tuck the left raw edge of binding into the pocket created by the right side of binding.
Edgestitch all the way down your open side to create a folded tie with a neat end.

How to bind the edge of your fabric using your bias binding:

Unfold one edge of your bias binding. With the right side of the bias binding to the wrong side of your fabric, pin your binding in place matching edges.
Stitch in place inside the folded channel, 1cm from the edge. Press the binding towards the edge.
Turn your fabric to the right side and bring your binding, over the edge of the fabric and to the front. Pin and edgestitch, covering the previous line of stitching.

How to bind the edge of a neckline using your bias binding:

Measure your neckline along the stitch line (not on the edge of the fabric). Our stitch line is 1cm in from the edge because this is the folded width of our bias binding. If you are using a pattern with seam allowances larger than 1cm then you will need to trim your seam allowance to be the right width for your bias binding before you measure the stitch line.
Notch your centre front and centre back.
Cut a strip of bias binding the same length as your neckline stitch line plus 1 cm extra at each end to sew the binding together with. Mark the position of your centre notches and shoulder seams using pins.
Open out your bias binding and stitch the two ends together, right sides together.
Press open and then press the long folded edges back into the centre so that you have one continuous strip of bias binding.
Pin to your neckline, matching notches and shoulder seams.
Stitch in place inside the folded channel, 1cm from the edge.
Snip curves on your neckline, making sure not to snip into your bias binding. (You don't need to snip your bias binding because it will stretch)
Pull all seam allowances towards the binding and understitch close to the previously stitched edge (on the binding)
Turn the binding in towards the wrong side of the garment, with the stitch line at the folded edge. Press.
Pin binding down flat, stretching it around the curves as necessary.
Stitch close to the folded edge of the binding. Press.